China Metal Rotary Gear Shaft Manufacturers Factory Suppliers

Dimension:　Φ10mm
Module: M0.25-M0.8
Material Type: Metal, Iron, Stainless, Brass, Copper as customer required

Material: Customized on request
Process: CNC lathe machining + lathe
Surface Treatment: Customized Requirements

Coating thickness: 15μm--20μm
Surface roughness: within 1.4μm
Outer diameter tolerance: g6
Surface hardening thickness: 0.8-3.5mm

Hardness: HRC60°- 62°
Roundness: within 3.0μm
Straightness: 1000mm does not exceed 5μm

1 Ultra-high precision: the shaft adopts advanced Japanese technology, and the performance is stable;
2 Wide application range and excellent durability;
3 Super cost-effective.

1. Material: S45C, Gcr15
2. The hardness is greater than 60-62 degrees, and the accuracy is g6
3. Shaft diameter: 3mm-150mm, the maximum length exceeds 6 meters

Connect these internally threaded shafts directly to threaded components, or use a fastener to secure. They have a flat surface area that allows set screws to dig into the shaft for securely...

A flat surface area allows set screws to dig into the shaft for securely mounting gears, sprockets, and bearings. The edges are chamfered to remove sharp corners, reducing damage to bearings,...

Combine these shafts with a machine key (not included) to transmit torque to gears, sprockets, and other power transmission components. All have an ANSI standard keyway (keys not included; see our...

A keyed rotating shaft can combine the shaft with a mechanical key, and then transfer torque to the power transmission part. All have an ANSI standard keyway. They will use chamfering to try to...

Aluminum keyed rotating shaft
Special vehicle drive shafts are mainly used for tank trucks, refueling trucks, sprinklers, sewage suction trucks, fecal suction trucks, fire trucks,...

Inch—1566 Carbon Steel Rotary Shafts Combine these general purpose drive shafts with gears, sprockets, and bearings to transmit rotary motion. All are turned, ground, and polished to meet tight...