Compare the size of stainless steel turned parts
Compare the size of stainless steel turned parts
The size of the two threaded turning parts is in sharp contrast to show the range of stainless steel parts that our company can produce and process. The threads are from M1.6 to M16, and the smallest large circle size can be processed from φ2.0 to φ32.
The specifications of the small size stainless steel turning parts in the left picture are M2*5 (head diameter)*20 (total length)
The specifications of the large-sized stainless steel turning parts on the left are M12*18*78, It is the thread Lathes pick teeth, rather than simply hobbing teeth,
The upper part is knurled and milled bilaterally. The outer diameter of knurling is 12MM and the length is 28MM. If there is a large area of stainless steel knurled, We used a custom knurling wheel to press out the pattern on a Hobbing machine. The principle is similar to hobbing teeth.
The large size stainless steel turning parts, As exquisite as crafts, If your monitor has a resolution greater than 1024*768, you can't appreciate its full-size picture.
