Shaft Machining
The shaft is a cylindrical object worn in the middle of the bearing or in the middle of the wheel or in the middle of the gear, but it is also square. Shafts are mechanical parts that transmit motion, torque, or bending moments. Generally round metal rods, each segment can have different diameters. Parts that make a rotary motion in the machine are mounted on the shaft.
Project
Shafts are mechanical parts that transmit motion, torque, or bending moments. Generally round metal rods, each segment can have different diameters.Motor shaft machining, stainless steel shaft machining, long shaft parts, precision shaft machining, small shaft machining, gear shaft machining, step shaft machining.
Technology
The product structure of the shaft is different. The shaft can be divided into a stepped shaft, a tapered mandrel, an optical shaft, a hollow shaft, a crankshaft, a camshaft, an eccentric shaft, various screw shafts, and the like.It is mainly used to support transmission parts, transmit torque and bear load. Shaft parts are rotating parts, whose length is greater than the diameter, generally consisting of the outer cylindrical surface, conical surface, inner bore and threads of the concentric shaft and the corresponding end face. According to different structural shapes, shaft parts can be divided into optical axis, stepped shaft, hollow shaft and crankshaft.
Shafts with an aspect ratio of less than 5 are called minor axes, and those with diameters greater than 20 are called elongated shafts, with most of the axes in between.
The basic production process is as follows:
1. Parts pattern analysis;
2. Determine the blank;
3. The method of determining the primary processing surface;
4. Determine the positioning benchmark;
5. Division phase
6. Heat treatment process arrangement;
7. Processing size and cutting amount;
8. Formulate the process;
9. Drive shaft machining process process diagram. Comprehensive analysis of the above:
