Stainless steel drive shaft

Stainless steel rotating shaft

Rotary Shafts Combine these general purpose drive shafts with gears, sprockets, and bearings to transmit rotary motion. All are turned, ground, and polished to meet tight diameter and straightness tolerances.

Steel shafts are generally stronger than stainless steel shafts but not as corrosion resistant. 1566 carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use. 12L14 carbon steel shafts have a lead additive that makes them easier to machine than any other rotary shaft but also more prone to wear. Black-oxide 1045 carbon steel shafts have a black-oxide coating for mild corrosion resistance. Chrome-plated 1045 carbon steel shafts have a 0.0001"-0.0005" thick layer of chrome plating on the outside of the shaft that provides wear resistance and some corrosion resistance. Nitride-coated 1045 carbon steel are the most corrosion resistant steel shafts. 4140 alloy steel shafts are for high-load applications. They have the highest yield strength of any steel shaft; however, they are more difficult to machine than carbon steel shafts.

Stainless steel shafts are more corrosion resistant than steel shafts but also more difficult to machine. 303 and 440C stainless steel shafts have good corrosion resistance. 316 stainless steel shafts have excellent corrosion resistance.

Shafts with chamfered edges have their edges ground to reduce damage to bearings, housings, and other components during installation.

Stainless steel drive shaft

In order to ensure the normal operation of the drive shaft and prolong its service life, pay attention to:

1. It is strictly forbidden for a car to start at a high gear.

2. It is strictly forbidden to lift the clutch pedal violently.

3. It is strictly forbidden for cars to be overloaded or speeding.

4. The working condition of the drive shaft should be checked frequently.

5. Always check the tightness of the transmission shaft hanger, whether the supporting rubber is damaged, whether each connection part of the transmission shaft is loose, and whether the transmission shaft is deformed.

6. In order to ensure the dynamic balance of the drive shaft, you should always pay attention to whether the balance pads are unsoldered. The new drive shaft assembly is provided as a complete set. When installing the new drive shaft, pay attention to the assembly mark of the telescopic sleeve and ensure that the flange fork is in a plane. When repairing and disassembling the drive shaft, the assembly mark should be printed on the telescopic sleeve and the flange shaft in order to keep the original assembly relationship unchanged during reassembly.

7. Grease should be frequently added to the universal joint cross bearing. In summer, No. 3 lithium grease should be injected, and in winter, No. 2 lithium grease should be injected.

Xiamen Kangfuxiang Machinery Co., Ltd., with more than 10 years of experience and hundreds of qualified personnel, is one of the leading manufacturers and suppliers of Splines in China. Provide Belt Pulley customization service, our factory specializes in the production of high-precision products.

1. who are we?

We are based in XiaMen, China, start from 2007,sell to Mid East(80.00%),Southeast Asia(10.00%),Domestic Market(2.00%),Eastern

Europe(1.00%),South Asia(1.00%),Northern Europe(1.00%),Central America(1.00%),Eastern Asia(1.00%),North

America(1.00%),Africa(1.00%),South America(1.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment;

3. what can you buy from us?

High and Low Voltage Switchgear,Switching element,Outdoor vacuum circuit breaker

4. why should you buy from us not from other suppliers?

works on things that matter. The best people and the best technologies take on the toughest challenges. We offer fast, quality service, reliable products

Hot Tags: Stainless steel drive shaft, manufacturers, suppliers, customized, wholesale, Metal Rotary Gear Shaft