Vertical Type Circulating Water Vacuum Pump

Our company adheres to 'integrity and quality as the foundation' policy, and establishes a good long-term cooperative relationship with customers at home and abroad, and strives to build itself into a Precision Plastic Worm Drive, Double Helical Gear, Automotive Plastic Spur Gear manufacturer that new and old customers can trust for life. We firmly believe in that the essence of innovative spirit is to create differentiated value. We seek cost-effective products in scale, seek development in cooperation, and give back to customers.

Our Certificate

We always feel that all success of our company is directly related to the quality of the products we offer. They meet the highest quality requirements as stipulated in ISO9001, ISO14000:14001 SGS guidelines and our stringent quality control system.

Production Market

We have customers from both domestic market and oversea market. XXX Sales managers can speak fluent English for good communication. Our main sales market:

North America 25.00%

Southern Europe 15.00%.

1,Specifications

Tank liquid circulation stirring nozzle, Tank liquid circulation stirring nozzle are used to agitate or mix Liquids stored in tanks, pits, or sumps.

2,Specification:

* Tank liquid circulation mixing jet Nozzle Materials: Glass Fiber Reinforced Plastic.

* Tank liquid circulation mixing jet nozzle Structure: one-piece construction without internal parts.

* Spray Patterns: Mixing Jet.

* Pressure Range: 1 to 4 bar (20 to 127 L/min).

* Inlet Thread: 1/4", 3/8", 1/2", 3/4" male BSPT or NPT

3,Features:

Plastic nozzle of tank liquid ejector use an unique venturi design which enables smaller pumps to circulate large volumes of tank solution.Designed on the basis of the Bernoulli theory, fluid under pressure is pumped into the nozzle through its large flow opening.

Inlet Thread (inch)	Orifice dim. (mm)	Capacity at different pressure (liter per minute)
		GFRP Plastic	316SS	1.0bar	1.5bar	2.0bar	3.0bar	4.0bar
1/4	5mm	o		20	25	30	38	45
3/8	8mm	o	o	34	42	48	59	68
1/2	9mm	o	o	34	42	48	59	68
3/4	10mm	o	o	64	78	90	114	127

4,Application:

Designed on the basis of the Bernoulli theory, fluid under pressure is pumped into the nozzle through its large flow opening. As the liquid exits the nozzle at high velocity, it draws surrounding solution through the nozzle’s "flow-through" chamber that's designed to eliminate internal material build-up.

The additional liquid flow mixes with the pumped solution, that is, the nozzle can pull in 4 gallons of surrounding solution for every 1 gallon pumped through the nozzle.

Design features of Plastic nozzle of tank liquid ejecto:

1. Plastic nozzle of tank liquid ejecto is designed based on the Bernoulli Theory together with the theory of geometric cured surface.

2.It could fully mixing gas ,liquid and other chemical component when these substance are in the same temperature and PH.

3.Corrosion resistance, aging resistance and high temperature resistance

Tank liquid circulation mixing jet Nozzle are also used in the many other industries such as Coating | Electronics | Motor | Food | Steel | Vehicle| Chemical Industry | Paper Making | Environmental Protection Large flow opening minimizes plugging A cost-effective method for optimizing liquid tand performance Allows small pumps to circulate large volumes of liquid Contains no moving parts to wear out or maintain Compact design simplifies mounting By keeping the particulate in suspension, filtration systerm clogging is prevented

Material: PP (glass fiber polypropylene ), 316SS, other material on your request

Connect size: 1/4'',3/8",1/2",3/4",1'',1.5''BSPT

Constructed of carbon fiber-reinforced polypropylene (fiber 20%) or SS316.

Maximum operating temperature is 120°C for PP model,300°C for SS316 model.

Corrosion resistance and aging resistance.

1. When can I get the quotation?

We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.

2. How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality.
If you need the samples, we would like to send sample from our Chinese factory or u can get the sample directly from our european agent storage.

3.What kind of files do you accept for printing?

PDF, Core Draw, high resolution JPG .

4.Can you do the design for us?

Yes. We have a professional team having rich experience in design and manufacturing.

5.How long can I expect to get the sample?

3-5 working days for samples.

6.What about the lead time for mass production?

15-20 working days for mass production.It depends on your quantity,and we will try our best to meet your needs.

7.What is your terms of delivery?

EXW, FOB, CIF, etc.

Our company has an experienced team dedicated to the research and development of Vertical Type Circulating Water Vacuum Pump, and can customize various products according to the different requirements of customers. Over the years, the society has witnessed the birth, development and glory of our company. We believe that only the best quality products are the source of enterprise survival. Our company invests a lot of manpower and material resources to develop the market with the advantage of big brand.

Hot Tags: plastic nozzle of tank liquid circulation mixing mixing jet ejector, manufacturers, suppliers, customized, wholesale, u10f 10 ft plastic u series nozzle full circle spray pattern, abs plastic flat spray nozzle tips, Gear Shaft Collar, SMP full cone water nozzle, plastic spray nozzle hs code, Internal Gear