Tungsten Carbide Flat Fan Spray Nozzles

It is the countless 'Never Give Up' that allows our Double clip hollow conical nozzle, Plastic Screw Gear, Shaft Sleeve to achieve a place in the market. We hope that the scale of talents will grow reasonably, the overall quality will improve significantly, and the team of high-level talents will grow continuously. The continuous innovation of our company also makes the enterprise become a symbol of the industry. All employees of our company are always valuable assets of our company. We aim at service, innovation, quality, professionalism and sustainability to improve our competitiveness. This enables them to be used with confident peace of mind.

Our History

Xiamen kangfuxiang has more than 10 years of history in China, focusing on high-quality mechanical parts and purification products.We started as a small company, but now we are one of the major suppliers in China's machinery industry and environmental protection industry.
Today, xiamen kangfuxiang has become one of the top manufacturers of high quality mechanical parts and environmental protection products, such as: non-standard parts, coupling, universal joint, air purifier and so on..

Production Market

We have customers from both domestic market and oversea market. XXX Sales managers can speak fluent English for good communication. Our main sales market:

North America 25.00%

Southern Europe 15.00%.

KFX whirljet spiral nozzle,SPJT spiral nozzle,whirljet full cone spiral nozzle
Full cone or hollow cone
Used in agricultural sprayer for irrigation

Material : SS, 316SS, brass, Teflon, PP, metal

Inch size : 3/8'',1/2'',3/4'',1'',1-1/2'',2'', 3", 4"

Spray pattern : Full cone, hollow cone

Thread : BSPT, NPT

Screw : male, female

Spray angle : 60- 170degree

Working pressure : 0.7-30bar

Application : Used in agricultural sprayer for irrigation

Spiral Nozzle Material:Telflon,PVC,PVDF,SS,Brass
Spray Pattern:Full Cone and Hollow Cone
Thread:Female and Male

· High energy efficiency

· One-piece/no internal parts

· Clog-resistant performance

· High discharge velocity

· Male connection standard; female connection available by special order

Spray Characteristics of Wide Range of Flows and Angles, Full Cone Spray Nozzles, Hollow Cone Spray Nozzles

· Wide range of flow rates and spray angles

· Fine atomization

Spray Angles: 50° to 180°
Flow rates: 0.5 to 3320 gpm (2.26 to 10700 L/min)
Available materials:SS303,SS304,SS316,Brass,Telflon,PP,POM,PVDF,Ceramic,etc.

Available materials:SS303,SS304,SS316,Brass,Telflon,PP,POM,PVDF,Ceramic,etc.

Product Description

The design of the Teflon material spiral nozzle

1,Teflon material spiral nozzle is also called the BJS jet apparatus, big flow nozzle, prevent clogging nozzle, has been widely used in environmental protection industry, flue gas desulfurization denitrification and dust removal;

2,Teflon material spiral nozzle can produce hollow cone and solid spray cone shape, jet Angle 60 °,90°,120°,150°, 170 °,180.This compact spiral nozzle can make the liquid in a given size of the pipeline on the maximum flow, under the pressure of 3 bar, flow rate from 5.5 to 4140 liters per minute.

3,Teflon material spiral nozzle can produce a series of concentric cone shape, spiral nozzle inlet and outlet in the center of the same line, but not internal blade, but inside the nozzle design into a spiral shape, tapering from the spiral water layers and layers of mist jet formation.Flow channel design can reduce the blocking phenomenon to a great extent, so it is also called super don't block the jet device).

4,The Teflon material spiral nozzle can install or replace, in the most of the pipeline system can provide the NPT or BSPT male and female interface.2 inch, 3 inch and 4 inch screw thread nozzle flange and two kinds of interface in the desulfurization of environmental protection industry, the nozzle connections are divided into three kinds, winding adhesive, flange connection, and screw thread connection.Interface size of 1/4 inch to 2 inches of jet respectively made of 316 stainless steel or brass castings;But 1/4 "- 1 inch of jets have TEFLON ptfe or polyvinylidene fluoride manufacturing;These jets, also can use a variety of other materials.Spiral nozzle commonly used material is PP, 304 316 L,Ceramics .The material of different can meet the needs of different customers.

5,Usually, 1/4 inch to 4 inch nozzles can be separately made of various materials, such as brass, 316 L stainless steel castings, PVDF, 95 ceramic, silicon carbide, TEFLON PTFE or PVC. And 316L stainless steel castings, PVC, 95 ceramics, silicon carbide stock a large number.

1, Teflon Spiral Spray Nozzle Called Desulfurization Nozzle Brass, Brass Anti-Clogging Nozzle, High Flow Nozzle Brass, Brass Dust Nozzle.

2, TEF Teflon Teflon Spiral Spray Nozzle (SPJT) Is A Solid Cone Or Hollow Cone Spray Nozzle, Spray Angle Range Of 60 Degrees -170 Degrees To 120 Degrees Routine. At 3 Bar Pressure, The Liquid Flow Rate Range Of 5.5 A 140 L / Min, Is Widely Used In Flue Gas Desulfurization Dust, Waste Gas Treatment, Waste Water Treatment, Fire Extinguishing Spray Cleaning And Other Fields.

3, This Compact Nozzle Has A Smooth Flow Of The Design, You Can Minimize Liquid Blockage, So That The Liquid In A Given Pipe Size For Maximum Flow.

4, Teflon Teflon Spiral Spray Nozzle Available On Most Piping Systems Installed Or Updated.

5, Available Nozzle NPT Or BSPT (External) Screw Type, TEFTeflon Conventional Teflon Spiral Spray Nozzle Are BSP Thread Size

6, Typically 1/4 Inch-4 Inch Brass Nozzle Respectively, TEF Stainless Steel Castings, PVDF, 95 Ceramics, Silicon Carbide, TEFLON PTFE Or PVC-Material, In Which, TEF Stainless Steel Castings, Poly Vinyl Chloride, 95 Ceramics, Silicon Carbide Have A Large Inventory, Guangdong Perth Promise Made To Be With Conventional Products. To Apply To Specific Areas, May Also Have Other Materials.

1. Q:Which level of quality are your products?

A:We have got CE, ISO, SGS, TUV, SONCAP certificate so far.

2. Q:What is the delivery time of your machine?

A:In general, the delivery time of our machine is about 30 days, customized machine will be delivered as the negotiation with our clients.

3. Q:Can the machine be customized as our need, such as put on our logo?

A:Surely our machine can be customized as your need, Put on your logo is also available.

4. Q:As the shipping period will take long time, how can you make sure the machine won’t be broken?

A:Our machine is film wrapped, to make sure the machine can be delivered to our customer smoothly, we will use the steel wire to fix the machine with the container.,

5. Q: May i know which payment will be accepted by your company?

A:So far 100%T/T before shipment, and 30% deposit paid by T/T, balance paid by L/C are available.

We use superb production technology, advanced testing equipment, perfect scientific management system, and fast logistics to continue to improve customer satisfaction with our Tungsten Carbide Flat Fan Spray Nozzles. In recent years, the company has been paying great attention to scientific management, and has set up a number of related functional departments, such as the sales department, the purchasing department, and the quality department. While enjoying the harvest of customers and the market, our company has formed and improved the lean production and total quality management system with our own characteristics in accordance with the quality management system standard.

Hot Tags: PTFE material spiral spray nozzle, manufacturers, suppliers, customized, wholesale, PP full cone spray nozzle, Teflon material spiral nozzle, Aircraft Double Helical Gear, Plastic Spray Nozzle, cone spray nozzle for exhaust gas scrubbing, 3 inch v belt pulley 5 8 bore