Eductor Mixing Nozzle For Tank Water Mixing

Eductor Mixing Nozzle For Tank Water Mixing

Layout Type：Horizontal

Mixing Drum Shape：Drum

Additional Capabilities：Coating

Operating type：Continuous Operating

Condition：New

PVDF：PP

316ss：1/4" -1"

Mini-Type：Mold Type

Male：Female

for Auto Coating Mixing：for Tank Water Mixing

Eductor Mixing Nozzle For Tank Water Mixing

Description
Mixing Fluid Nozzle
Material Characteristic
Constructed of carbon fiber-glass-reinforced Polypropylene of SS 316.
Maximum operation temperature 120°C for PP, above 300°C for Stainless Steel.
Corrosion resistance and aging resistance.

Functions
Provides a homogeneous air-free fluid mix for solution, minimize the oxygenolysis.
Enhance the turbulance effect, mix the solution well.
Assures Uniformity of solution to improve the surface treatment for workpiece.

Design Features
Proper parameters are selected to design the geometric curved surface, according to
Berboulli flow theory of gravity. The fluid that gush out from the taper nozzle with a high
velocity form a low pressure area round the outlet. Because of the different pressure
between areas and the fluid momentum act on input liquid, the high velocity fluid and the
input liquid is introduced into the "mixdiffuse" chamber with the proportion of 1:4 and then
spout the nozzle, offering a air-free mix of solution.

Note
In large solution tank, Mixing fluid nozzle provide better efficiency if they are aligned
circlewise rather than monoaligned, while the efficiency is lower when they are
horizontally aligned.
Mixing fluid nozzle should be placed at the bottom of the tank to get maximum flux rate.

Xiamen Kangfuxiang Machinery provides parts design, prototyping, mold design, mold production, mass production and internal assembly services. We work with many customers all over the world and have a deep understanding of the mold industry. Our experience ranges from simple designs to challenging technical parts.

1.Q:Can your products be customized?

A: Yes, we have a professional team which has rich experience in welding equipments,so we'll try our best to satisfy your requirement.

2.Q:What about the transportation?

A: Usually we take seaway,cause it's more convenient and cheaper.

3.Q: What's your after-sale service?

A: Some damageable spare parts can be offered free.

4. Q:How long is the production cycle?

A: 30-50 days

5.Q:What are your terms of payment?

A: T/T or L/C

Hot Tags: eductor mixing nozzle for tank water mixing, manufacturers, suppliers, customized, wholesale, chemical tank liquid mixing nozzle, Tank liquid circulation stirring nozzle, Liquid mixing jet nozzle, Plastic nozzle of tank liquid ejector, Tank liquid circulation mixing mixing jet nozzle, Liquid Mixing Jet Venturi Nozzle