Latest Products
Contact Us
1/F, Building 6, 2288 Tongji Road, Xike Town, Xiamen City, Fujian Province, China
Please write directly to the email address. We cannot reply to messages left in the background. Thank you for your support.
- sales@kfxmachining.com
- +86-592-5759276
SWP-F Cardan Shaftuniversal Joint
SWP-F Cardan Shaftuniversal Joint
Cardan shaft maintenance
It is necessary to grease the moving parts of a cardan shaft at certain intervals to remove used lubricant and foreign matter, if any, and replenishing the lubricant.
Lubrication is required after cleaning with high pressure or a steam jet.
Description
SWP-F Cardan Shaftuniversal Joint
Cardan shaft maintenance
It is necessary to grease the moving parts of a cardan shaft at certain intervals to remove used lubricant and foreign matter, if any, and replenishing the lubricant.
Lubrication is required after cleaning with high pressure or a steam jet.
SWP-F Cardan Shaftuniversal Joint
General notes
» The installation of cardan shafts requires expertise and careful workmanship!
» Be sure to follow manufacturer's instructions forinstallation and repair.
» Parts to be installed in universal drives must bein perfect working order and approved for the specific application in hand.
» Make sure that cardan shaft locating centres are properly seated and that the flange surfaces are in perfect contact!
» The operation ratings must never be exceeded.
» Do not use high pressure (water, stream, air) for cleaning to prevent damage of the bearings and sealings!
Specific product description
SWP universal coupling/joint is mainly used in rolling milll,hoisting and other heavy machinery.
Features of SWP series cardan shaft:
1.Gyration diameter:160~640mm
2.Nominal torque:16~1250KN*m
3.Max angular misalignment: 10ｏ
4.Reasonable configuration,high safety and long service life
5.High transmission efficiecy:98.6%
F:long big stretch type
SWP-F Cardan Shaftuniversal Joint
Type | D | Nominal torque Tn/ kN·m | Weary torque f/ kN·m | Angle β/ (°)≤ | LS | Lmin | D 1 (js11) | D2 (H7) | D3 | E | E 1 | b×h | h1 | L1 | n-d | Moment of inertia I/kg·m2 | Mass m/kg | ||
Lmin | Increase per 100mm | Lmin | Increase per 100mm | ||||||||||||||||
SWP160F | 160 | 16 | 8 | 10 | 150 | 770 | 140 | 95 | 114 | 15 | 4 | 20×12 | 6 | 85 | 6-13 | 0.14 | 0.0059 | 51 | 2.1 |
SWP180F | 180 | 20 | 10 | 170 | 830 | 155 | 105 | 121 | 15 | 4 | 24×12 | 7 | 95 | 6-15 | 0.23 | 0.0072 | 64 | 2.3 | |
SWP200F | 200 | 31.5 | 16 | 190 | 950 | 175 | 125 | 127 | 17 | 5 | 28×16 | 8 | 110 | 8-15 | 0.4 | 0.0114 | 88 | 3.4 | |
SWP225F | 225 | 40 | 20 | 210 | 1070 | 196 | 135 | 152 | 20 | 5 | 32×18 | 9 | 130 | 8-17 | 0.66 | 0.029 | 120 | 6.6 | |
SWP250F | 250 | 63 | 31.5 | 220 | 1110 | 218 | 150 | 168 | 25 | 5 | 40×25 | 12.5 | 135 | 8-19 | 1.06 | 0.0407 | 158 | 7.3 | |
SWP285F | 285 | 90 | 45 | 240 | 1270 | 245 | 170 | 194 | 27 | 7 | 40×30 | 15 | 150 | 8-21 | 2.24 | 0.0702 | 255 | 9.4 | |
SWP315F | 315 | 140 | 63 | 270 | 1410 | 280 | 185 | 219 | 32 | 7 | 40×30 | 15 | 170 | 10-23 | 3.99 | 0.1144 | 344 | 12 | |
SWP350F | 350 | 180 | 90 | 290 | 1540 | 310 | 210 | 245 | 35 | 8 | 50×32 | 16 | 185 | 10-23 | 6.9 | 0.1663 | 460 | 13.6 | |
SWP390F | 390 | 250 | 112 | 315 | 1680 | 345 | 235 | 273 | 40 | 8 | 70×36 | 18 | 205 | 10-25 | 11.9 | 0.2695 | 600 | 18 | |
SWP435F | 435 | 355 | 160 | 335 | 1880 | 385 | 255 | 299 | 42 | 10 | 80×40 | 20 | 235 | 16-28 | 22.41 | 0.3645 | 985 | 20 | |
SWP480F | 480 | 450 | 224 | 350 | 2000 | 425 | 275 | 351 | 47 | 12 | 90×45 | 22.5 | 265 | 16-31 | 39.09 | 0.7028 | 1356 | 28 | |
SWP550F | 550 | 710 | 315 | 360 | 2230 | 492 | 320 | 402 | 50 | 12 | 100×45 | 22.5 | 290 | 16-31 | 62.12 | 1.1842 | 1785 | 35.7 | |
SWP600F | 600 | 1000 | 500 | 370 | 2800 | 544 | 380 | 450 | 55 | 15 | 90×55 | 27.5 | 360 | 22-34 | 100.48 | 1.7159 | 2403 | 40.5 | |
SWP640F | 640 | 1250 | 630 | 380 | 2920 | 575 | 385 | 480 | 60 | 15 | 100×60 | 30 | 385 | 18-34 | 168.28 | 2.308 | 3207 | 48.3 |
Why Choose US？
1.since we hancle all stepsin one location,our processis speedy,cost efficient andwell controlled.Equip ourfactory with 30set CNC,15set CNC turning and 10setSheet Metal Fabricationmachine to assure thecustomers high qualitymetal machining parts.
2.we focus on CNC machining since 2007,withrich experience in our field.There have many anvancedequipments and a first-class working team,promotes goodcorporateculture and formscomfortable workingatmosphere.
3.ln order to manage thediverse production sets outat KFX,the entire process islogged into a compaterizedsystem.From receiving theorders to shipping out theproducts every step can befollowed closely.Customerswill get satisfying productsin the requested time.
Company information
Q: How do you make our business long-term and good relationship?
A: 1) We keep good quality and competitive price to ensure our customer benefit.
2) We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q: What’s the business scope for your company?
A: Our main products are orthopedic products and sporting products.
Q: Can you provide catalogue for me?
A: Yes, I’m gladly to send catalogue for your reference if you have request.
Q: May I come to visit your factory?
A: Of course, welcome you visit our factory at any time.
Hot Tags: swp-f cardan shaftuniversal joint, manufacturers, suppliers, customized, wholesale
You Might Also Like
